Type: Power-Distribution-Module for 2210/3600/ESS30/ESX10
Description
- Reduced wiring time through printed circuit board design
- Space-saving, compact dimensions
- 30 slots (without redundancy) accommodating mechanical or electronic circuit breakers or
- Fully redundant version with 2 x 12 channels or
- Redundant line entry via de-coupling diodes for 24 channels
- Flexible start-up and maintenance through circuit breakers to be plugged in later (with the system live)
- Convenient spring-loaded terminals (push-in technology) for load and signal terminals
- Supply up to 100 A or 2 x 80 A redundantly
- Group signalling through integral potential-free auxiliary contacts
- Signalling available separately per group in the event of redundancy
- Optional cable organisers below the module (replacing an external cable duct)
- Protection against brush contact of all live parts
- Mounting in a 19” rack optional or on a mounting plate by turning the reversible side flanges
Technical Data
| Mounting method |
racks mounting brackets |
| Circuit breaker type |
thermal-magnetic electronics |
| Dimensions |
height 4U (177.8mm) |
| Max. rated voltage |
DC +24 V DC +65 V |
| Number of ways |
2 x 12 redundant 1 x 24 non-redundant 1 x 30 non-redundant 1-pole protected |
| For circuit breaker type |
2210 1-pole 3600/3900 ESS20 ESX10 |
| Supply max. current rating |
80 A |
| Supply terminal type |
Screw terminals 25 mm² |
| Max. current rating of loads |
16 |
| Terminal type of loads |
Spring-loaded terminals 2.5 mm² |
| Signalling |
Make contacts connected in series |
| Terminal type of auxiliary contacts |
spring-loaded terminals 2.5 mm² |
| Operating temperature range |
0 … +50 °C |
Accessories
Accessories
| Order number | Description | |
|---|---|---|
| SB-S11-P1-01-1-1A | jumper | |
| X223 569 01 | rear wall as protection, set with 4 mounting screws |
Applications
Applications
- Automation
- Chemical, Oil & Gas
- Pharmaceutical & Food
- Power Engineering DC 24 V
Downloads
Data sheet
2.8 MB