Solutions for your safety

Type: Power-Distribution-Module for 2210/3600/ESS20/ESS30/ESX10

Description

  • Reduced wiring time through printed circuit board design
  • Space-saving, compact dimensions
  • 30 slots (without redundancy) accommodating mechanical or electronic circuit breakers or
  • Fully redundant version with 2 x 12 channels or
  • Redundant line entry via de-coupling diodes for 24 channels
  • Flexible start-up and maintenance through circuit breakers to be plugged in later (with the system live)
  • Convenient spring-loaded terminals (push-in technology) for load and signal terminals
  • Supply up to 100 A or 2 x 80 A redundantly
  • Group signalling through integral potential-free auxiliary contacts
  • Signalling available separately per group in the event of redundancy
  • Optional cable organisers below the module (replacing an external cable duct)
  • Protection against brush contact of all live parts
  • Mounting in a 19” rack optional or on a mounting plate by turning the reversible side flanges

Technical Data

Mounting method racks
mounting brackets
Circuit breaker type thermal-magnetic
electronics
Dimensions height 4U (177.8mm)
Max. rated voltage DC +24 V
DC +65 V
Number of ways 2 x 12 redundant
1 x 24 non-redundant
1 x 30 non-redundant
1-pole protected
For circuit breaker type 2210 1-pole
3600/3900
ESS20
ESX10
Supply max. current rating 80 A
Supply terminal type Screw terminals
25 mm²
Max. current rating of loads 16
Terminal type of loads Spring-loaded terminals
2.5 mm²
Signalling Make contacts connected in series
Terminal type of auxiliary contacts spring-loaded terminals
2.5 mm²
Operating temperature range 0 … +50 °C

Accessories

Accessories

Order number Description
SB-S11-P1-01-1-1A jumper
X223 569 01 rear wall as protection, set with 4 mounting screws

Applications

Applications

  • Automation
  • Chemical, Oil & Gas
  • Pharmaceutical & Food
  • Power Engineering DC 24 V